| Parameter |
Typical value |
| Optical parameters |
| Cut-on wavelength λcut-on (10%) µm |
2.9±1.0 |
| Peak wavelength λpeak, µm |
4.2±0.5 |
| Optimal wavelength λopt, µm |
5.0 |
| Cut-off wavelength λcut-off (10%) µm |
5.5±0.3 |
Detectivity D*(λopt, REF), cm ⋅Hz1/2/W |
≥1.0×1010 |
| Detectivity D*(λopt, SIG), cm⋅Hz1/2/W |
≥1.0×1010 |
| Output noise density vn(100 kHz, RLoad = 50 Ω, REF), nV/Hz1/2 |
≤100 |
| Output noise density vn(100 kHz, RLoad = 50 Ω, SIG), nV/Hz1/2 |
≤100 |
| Electrical parameters |
| Voltage responsivity Rv (λopt, REF), V/W |
≥1.0×104 |
| Voltage responsivity Rv (λopt, SIG), V/W |
≥1.0×104 |
| Low cut-off frequency flo, Hz |
DC |
| High cut-off frequency fhi, MHz |
≥1.8 |
| Output impedance Rout (REF, SIG, BAL/A-BAL), Ω |
50 |
| Output voltage swing Vout (RLoad = 50 Ω), V |
0.4 |
| Output voltage offset Voff, mVDC |
±30 |
| CMRR balance / reference (100 kHz), dB |
≤-32 |
| CMRR auto-balance / reference (100 kHz), dB |
≤-22 |
| Power supply voltage Vsup, VDC |
+9 |
| Power supply current Isup, A |
1.5 |
| Other information |
| Active element material (REF and SIG) |
epitaxial HgCdTe heterostructure |
| Optical area AO (REF and SIG), mm×mm |
1×1 |
| Window (REF and SIG) |
wAl2O3 |
| Acceptance angle Φ (REF and SIG) |
~36° |
| Ambient operating temperature Ta, °C |
5 to 25 |
| Reference output socket (REF) |
SMA |
| Signal output socket (SIG) |
SMA |
| Balanced / auto-balanced output socket |
SMA |
| Power supply socket |
DC 2.1/5.5 |
| Mounting hole |
M6 |
| Fan |
yes (2 pcs) |
